Pay-at-Pump Upgrades: What Fuel Retailers Need to Know About EMV

Fuel dispenser at a gas station forecourt

We've seen the magnetic strip readers used at the pump for a while. Much like renting videos from VHS, they're still functional but not really keeping up with the world. Chip cards are becoming standard on a register, meaning the fraud is moving to any place still using a magnetic strip. Outdoor dispensers will be high on the list.

Card networks have pushed back the liability shift on fuel pumps a few times, giving a little breathing room.

What is Changing?

Chip payments mean a unique code is generated for each transaction. If a thief steals a card with the data on, they will gain nothing. Magstripe cards have no protection. Counterfeit cards are very successful on non-chip enabled pumps.

The customer will have to leave their card in the reader until the transaction has completed. This can cause delays as there are prompts to complete. If they haven't used a dipped card before, they will need clear prompts on screen.

Behind the scenes we'll need our pump, site controllers, POS and payment processors to be able to communicate with the EMV protocols. We also need everything to be certified to work together. If we just replace the reader we won't have a completed project.

Dispensers & Readers

Take stock of your dispensers including their make, model and age. Newer dispensers will have a chip enabled reader module. However many of the older dispensers won't be able to have this added. This means replacing the dispenser.

This can be a big job. Crews may have to cut through concrete, add new piping and rewire the dispenser. There are strict health and safety rules on each. Weights and measures seals will also need correct handling.

Ensure the readers are certified, tamper proof, weather proof (sun, heat and rain). Having poor readers will cause problems with glare on the screen at midday. Most retailers will also want to add contactless. If you have to do this twice you'll get 2 periods of downtime and 2 periods of labour.

Network & Connectivity

Chips mean more data is being sent and more trips. If you have a slow or poor connection this can cause timeouts. If a timeout occurs you'll have an unhappy customer leaving to go to the next station.

Most sites will require a reliable broadband connection with a cellular backup. With business connectivity solutions you'll have automatic failover and your pumps will continue to sell. If you have a single point of failure your dispensers will all be stuck.

Take a look at the cabling running from forecourt to back office. Often this will be long and old running under the pavement. Water and age can cause issues. Adding a structured cabling solution with correct piping and labelling will save hours of troubleshooting. Network Infrastructure Services can test your cables ahead of upgrading to ensure bad cables aren't an issue.

Security within the network is also important. Best practice for network security on fuel sites is to have your payment devices on a separate network segment. You can also reduce traffic by using firewall rules. The card data should also be encrypted at the reader. Patching devices regularly and logging will help identify any odd behaviour. This will also meet PCI requirements. Having a clean network will make your audit easier.

Minimising Downtime

You'll lose sales on fuel and in store whilst your pumps are offline. With good planning you can reduce the amount of time.

Batch your dispensers to upgrade so you are still selling on some of your island. Plan your upgrades during off peak times. Try to avoid holidays and peak fuel price days. Also look at your fuel delivery schedule to avoid conflict with the tanker and crew.

As much as possible, plan ahead. Have readers pre configured and ensure you have a connection to your processor. Test your network route. On the day of your upgrade run test cards on all your pumps. Have a rollback plan ready in case any of your pumps don't pass certification.

Have signs up to let your customers know what is going on. Put a short message on your pump toppers to reduce complaints. This will help reduce IT downtime.

Working with a Nationwide Field Team

One site is easy, but if you have a chain of dozens or hundreds of locations it can become a logistical nightmare. Every site will be different with different dispensers, cabling and local rules.

Using IT field services nationwide can help. You'll have one scope of work and a checklist for all your sites. Technicians will be local to each site to keep costs down and reduce travel. Everything will be to the same standard across all states making it easier to support once live.

Ask for documentation. Have serial numbers, as built network diagrams and test results for all your dispensers. If your reader breaks in 2 years time you'll have this file to refer back to.

Having post launch support is key. Pumps don't break at convenient times. If your reader breaks at 2am on a highway stop you'll lose sales until someone comes to fix it. Using 24/7 IT support with a clear escalation path will help keep small issues from causing closed lanes.

Future Proofing

EMV is just the start. Contactless payments, mobile wallets and loyalty offers are coming to the forecourt. If you have a solid network and flexible hardware you'll be able to easily add these features.

Plan your upgrade as a project for your site. Ensure your hardware is correct, your cabling is tested, your network is secure, you have downtime planned and field support. If you do all 5 of these you'll have a simple chip upgrade to do at the weekend.

Ready to Transform Your IT Infrastructure?

Contact Arch Enterprise, Inc. today for expert consultation and professional installation services tailored to your business needs.

Trusted by businesses nationwide24/7 SupportCertified Technicians